Recommend: > Dewalt d55153 knowledge droplet
Choose your dewalt d55153 resources > Dewalt d55153 Sales | Research | Recommendations | Resources

1.) Dewalt d55153:

2.) Dewalt d55153 sales:

Click HERE for even more dewalt d55153 items!

Dewalt d55153 are available like so:


DEWALT D55153 Heavy-Duty 15 Amp 1 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor
Feature: ... 1.1 of continuous horse power; 18 inches long by 18.5 inches wide by 16.75 inches high; 56.5 pounds; Built for cold weather startup with dual soft-start valves; Quick recovery with a 3.8 CFM delivered @ 100 PSI pump; Designed with 4-gallon twin stack tank and dependable cast-iron cylinder ...more
Customer Reviews —
Editorial Reviews — [1] ... Product Description | Features: 4.5 CFM delivered @ 100 PSI, enables speedy recovery. * Oil lubricated pump improves durability. * Dual soft start valves assist in cold weather start up. * 4 gallon twin stack tank design with proven acceptance in the market. * Cast iron cylinder enhances pump life. Specifications: * Drive: Direct drive * Horsepower: 2-1/2 Max HP * Tank Size: 4 gal * Power Supply: 120V AC 14 amps, 60 Hz, 2 pole induction motor * CFM @100 PSI: 3.2 CFM * Pump Speed: 3400 rpmIncludes: DeWALT Synthetic...more
[2] ... Product Description | The DEWALT D55153 Hot Dog Compressor has all the power of a large compressor, but constructed as a smaller, lighter unit. It delivers 3.8 cubic feet per minute at 100 psi and is durably built with oil-lubricated cast-iron cylinder. Included with the Hot Dog Compressor is the regulator and an initial fill of DEWALT synthetic air compressor oil....more


Factory-Reconditioned DEWALT D55153R 15 Amp 2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor
Feature: ... Factory reconditioned to perform like new!; 2 HP motor, 4.5 cfm at 100 psi; Dual soft start valves assist in cold weather start up; Cast iron cylinder enhances pump life; Oil lubricated pump allows for long life ...more
Customer Reviews —
Editorial Reviews — ... Product Description | The D55153 1.1-horsepower electric compressor packs all the air you'll need plus high-quality features into a small, lightweight unit. Delivering 3.8 cubic feet per minute at 100 psi, this stacked tank unit with U.S. fittings and an overload-protected motor is designed to exceed any contractor's expectations. The D55153 is oil-lubricated with a cast-iron cylinder to ensure that it is built for long life. Regulator is included....more


DEWALT D55152 Heavy Duty 15 Amp 2-3/4 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor
Feature: ... 15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle; 4 cfm delivered at 90 psi; dual soft start valve for cold-weather starts; oil-lubricated pump; Cylinder constructed of cast iron; Includes DEWALT synthetic compressor oil and pressure regulator; 19.6 by 19.6 by 17.4 inches; 72 pounds; 1-year warranty ...more
Customer Reviews — [1] Rating: 5 Date: 2007-06-10 Summary: THE BEST EVER ... I work in the painting industry and I mainly use this compressor anywhere I go to texture paint the house. It is easy to carry around, and has two safety air cooling system to prevent over heating. It is so powerful and durable. I would not ask for anything else, but this. I also use it around the house while I am not on the job for all my air needs from inflating tire, exercise ball, air bed, blowing and cleaning, etc, etc......This is all I needed. ...more
[2] Rating: 5 Date: 2008-09-27 Summary: Compact and does the job ... I was nervous about ordering this product because of the shipping problems. I received mine and there wasn't a scratch or any problem. After adding the oil and running the break-in time, my compressor works great. Maintains a nice pressure cuts in and out at a normal rate. Noise isn't unbearable. It does make noise but they all do. I was able to have fairly normal conversation while it was running. The pressure release valve is a bit hard to reach, but that is easily fixed with a short bit string tied to the ring and ...more
[3] Rating: 5 Date: 2007-07-10 Summary: Built For the Professional ... Had a large crew of people over at the house to re-do the roof (~15 square). We had two roofing nailers going along with a 3" nail gun (for the sheathing) (obviously we split one of the lines to feed two guns). This compressor had no problem keeping up. The cycle time of this compressor is great. I'm still stuck on the oiled compressor theory, which this has. Another benefit to this design is the fact that the regulator/quick connects are tucked away between the tanks. If you happen to drop this compressor (I haven't ...more
[4] Rating: 4 Date: 2008-11-25 Summary: Hardwood Floors Installer ... This compressor is a work horse. Gives you the continous power when you need it. The ony problem is the cold start ups but i'm sure all compressors have that problem. ...more
Editorial Reviews — [1] ... Product Description | Features: 4.0 CFM delivered at 90 PSI, provides rapid recovery. * Oil lubricated pump improves durability. * Cast iron cylinder enhances pump life. * Run multiple tools from dual universal couplers. * Ball valve drain allows for quick and thorough tank draining. * Convenient cord wrap for easy storage. * Dual soft start valves assist in cold weather start up. Specifications: * Drive: Direct * Horsepower: 2.7 MAX HP * Tank Size: 4 gal * Power Supply: 120V AC, 15 amps, 60 Hz, 2 pol induction...more
[2] ... Amazon.com | Here's a compressor ready for the job site with the professional contractor. The oil-lubricated pump with cast iron cylinder gives you four cubic feet per minute at 90 psi, enough to run multiple tools off the dual universal couplers. It draws low amps, too, great for job-site conditions. The panel is protected between the two tanks, a feature we really like, and features large, easy-to-read gauges for tank pressure and regulated pressure, as well as the regulator and the two quick couplers. We...more


Makita MAC2400 13 Amp 2-1/2 Horsepower 4.2-Gallon Oiled Twin Hot Dog Compressor
Feature: ... 13 amp, 2-1/2-horsepower, 4.2-gallon oiled twin hot dog compressor with handle; 4.2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise; Cast-iron pump and roll cage construction; 1/4-inch brass Makita universal coupler; 19-3/8 by 18 by 18-3/4 inches; 77 pounds; 1-year warranty ...more
Customer Reviews — [1] Rating: 4 Date: 2008-11-29 Summary: Just add wheels ... A contractor used my compressor to frame my garage because his compressor kept flipping the circuit breaker. It kept up with him at all times using 200 feet of hose, with some leaky connectors. He never had to wait for air. The unit runs quietly. I have been comparing compressors for 6 months and to me this has always been the best compressor for the money. It needs good wheels and a handle to be more portable. ...more
[2] Rating: 5 Date: 2008-11-23 Summary: Great Compressor - You Won't be Disappointed ... After reading the reviews on several compressors, I ordered this one around 3:00PM and it was delivered about 9:30AM the following morning, using Prime next day delivery. As stated in many other reviews, this is a well-designed and well-built compressor, and it is heavy. I expect this compressor to last me many years. The required compressor oil was included and the instructions for the short break-in process were clear and concise. The compressor was immediately put into service to build a storage shed. It worked ...more
[3] Rating: 5 Date: 2008-11-03 Summary: Great compressor ... Bought the Makita MAC2400 compressor after my Campbell Hausfield pancake compressor stopped working. This compressor is solidly built and relatively quiet. It's much, much quieter than the pancake. There's a lot of steel and almost no plastic on this product -- that's rare these days. It's heavy -- you definitely wouldn't want to carry this around on a daily basis. I've had it for a couple of weeks and it has been great -- no problem with a framing nailer. Would buy it again. ...more
[4] Rating: 5 Date: 2008-11-04 Summary: Packaging Improved 10-08 ... Even after reading everyone's helpful reviews,some of which mentioned shipping damage,I decided to roll the dice and order this compressor.I am happy to report that it arrived in fine shape! Judging from descriptions of packaging problems others have given,I'm guessing that Makita has improved their "boxing".The air filter cover was held safely in place by a piece of cardboard,and everything else was fine.Thanks to all of you that took the time to review. ...more
Editorial Reviews — ... Product Description | CFM at 90 PSI: 4.2, Max. PSI: 130, Volts: 115, Amps: 12.3, HP: 2.5, Air Tank Size (gal.): 4.2, Tank Description: Twin-Stack, Pump: Single phase, cast iron cylinder, oil-lubricated, Portable or Stationary: Portable...more

DEWALT D55153 Heavy-Duty 4 Gallon Twin HotDog Compresso

DEWALT D55153 AIR COMPRESSOR * NEW * NO RESERVE!!!

3.) Dewalt d55153 resources
dewalt d55153 doggie gifts


Copyright 2006 Intersection9th.com

Learn Well!

Copyright 2006 Intersection9th.com